Mechanical installation
3.3 Installation
3.3.3
Lifting the cabinet units off the transport pallet and installing them
The applicable local guidelines regarding the transportation of the cabinet from the transport
pallet to the installation location must be observed.
A crane transport assembly (option M90) can also be fitted on the top of the cabinet.
The fixing screws of the transport pallets can be removed without having to lift the cabinet
unit. The positions of the fixing screws are indicated by red markings on the outside of the
pallets.
Figure 3-7
For cabinet units without base (in the figure on the left), the fixing screws of the transport
pallets must be removed from the underside of the pallet.
For cabinet units with base (in the figure on the right), the fixing screws of the transport pallet
are accessible only after the cover is opened. They can then be loosened and removed
directly from the front.
Pay attention to the weight and center of gravity!
The weight specified on the packaging and the designated center of gravity must always be
taken into account when the cabinet is lifted or transported!
This potential hazard must be taken into account particularly once you have unscrewed the
cabinet units from the transport pallet!
54
Lifting from the transport pallet (left: without base; right: with base)
WARNING
Cabinet Modules
Manual, 03/2013, A5E03263538A