Siemens SINAMICS S120 Manual page 229

Order no.
Degree of protection (standard version)
Dimensions (standard version, IP20)
- Width
9)
- Height
10)
- Depth
Weight, approx. (standard version)
Frame size
Rated short-circuit current acc. to IEC
Rated power of a typ. 6-pole standard induction motor based on I
1)
Rated power of a typ. 6-pole standard induction motor based on I
2)
The base load current I
3)
The base load current I
4)
Including control reserve
5)
For the interdependency of pulse frequency and max. output current/output frequency, see SINAMICS - Low-Voltage
6)
Configuration Manual on the customer DVD supplied with the device.
The specified power loss equals the maximum value at 100 % capacity utilization. The value in normal operation is
7)
lower.
Total of all motor cables. Longer cable lengths for specific configurations are available on request, see SINAMICS -
8)
Low-Voltage Configuration Manual on the customer DVD supplied with the device.
With option L08 (motor reactor):
9)
- Frame size HX/JX →Supplementary cabinet 600 mm wide
With option L10 (dv/dt filter plus VPL):
- Frame size FX/GX/HX/JX →Supplementary cabinet 600 mm wide
With option L34 (circuit breaker at output side):
- Frame size FX/GX →Supplementary cabinet 400 mm wide
- Frame size HX/JX →Supplementary cabinet 600 mm wide.
The cabinet height increases by 250 mm with IP21 degree of protection, and by 400 mm with IP23, IP43 and IP54
10)
degrees of protection.
Cabinet Modules
Manual, 03/2013, A5E03263538A
6SL3720-
mm
mm
mm
kg
kA
is based on a duty cycle of 110% for 60 s or 150% for 10 s with a duty cycle duration of 300 s.
L
is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s.
H
5.6 Chassis format Motor Modules
1TE37- 1TE38- 1TE41-
5AA3 4AA3 0AA3
IP20 IP20 IP20
600 600 800
2200 2200 2200
600 600 600
490 490 700
HX HX JX
65 84 84
or I at 3 AC 50 Hz 400 V.
L H
or I at 3 AC 60 Hz 460 V.
L H
Cabinet Modules
1TE41- 1TE41-
2AA3 4AA3
IP20 IP20
800 800
2200 2200
600 600
700 700
JX JX
100 100
227