Safety Information - Siemens SINAMICS S120 Manual

Options
8.53 M80 to M87, DC busbar system
Note
Current rating of the DC busbar
The required current intensity of the DC busbar depends on the individual plant
configuration. For this reason, a fixed DC busbar thickness is not assigned to the individual
Cabinet Modules. The required thickness must be configured for each individual case and
specified as option M80 to M87 (mandatory option).
For transport units, integrated busbars are installed at the factory. Connection jumpers are
not required inside a transport unit.
For option M26 (side panel on the right), connection jumpers are not required, nor are they
permitted.
DC busbar
Figure 8-64
8.53.2

Safety information

NOTICE
Connecting the DC busbars
With a side-by-side configuration of the cabinet units, the DC busbars of the individual
cabinet units must be connected to each other.
542
M80 - M87, DC busbar
Cabinet Modules
Manual, 03/2013, A5E03263538A