Siemens SINAMICS S120 Manual page 87

Table 4- 6 X100, terminal block in the Line Connection Module for routing the auxiliary voltages
Terminal
1
1
2
2
3
3
4
4
5
5
6
6
-F24
The maximum load capability of the auxiliary power supply system is 80 A.
Max. connectable cross-section: 16 mm
Tightening torque: 2 Nm
Note
External infeed
An external customer infeed to the auxiliary power supply system can be connected at
terminal block -X100 of the Line Connection Module.
Fuse
A 10 A-fuse is incorporated in the auxiliary power modules to protect the 24 V DC-auxiliary
voltage. The order number for this fuse as a spare part is 6SL3760-0BG00-0AA0.
Fuse type: TAC ATO flat plug-in fuse according to DIN 72581-3, UL 248 Special Purpose
Fuses, 10 A, 58 V, manufacturer: Littlefuse
Cabinet Modules
Manual, 03/2013, A5E03263538A
Voltage tap
Line voltage:
380 to 480 V 2 AC or

500 to 690 V 2 AC (max. 759 V AC)

230 V 1 AC (max. 265 V AC)
24 V DC for the electronics power supply (max. 30 V DC)
24 V DC fuse
2
Electrical installation
4.6 Connections
Rated current
Max. 80 A
Max. 80 A
Max. 80 A
Max. 10 A
85