Siemens SINAMICS S120 Manual page 133

Cable routing for the "Safe Torque off" and "Safe Stop 1" functions
Note
Cable routing
The procedure is the same as that for the customer terminal block.
Connect the cable to the terminals to control the functions.
(→ See the chapter titled "Options", section "K82, terminal module for activating "Safe Torque
Off" and "Safe Stop 1"")
Cable routing for the Terminal Module TM54F
Note
Cable routing
The procedure is the same as that for the customer terminal block.
Connect the cable to the terminals to control the functions.
(→ See the chapter titled "Options" in section "K87, Terminal Module TM54F")
Cabinet Modules
Manual, 03/2013, A5E03263538A
Electrical installation
4.6 Connections
131