Siemens SINAMICS S120 Manual page 385

Description
The Safety Integrated Basic functions do not require a license. A license is, however,
required for each axis with safety functions in the case of Safety Integrated Extended
functions. It is irrelevant which safety functions are used and how many.
In this case, option K01 is for 1 axis, option K02 for 2 axes etc. - up to option K05 for 5 axes.
● K01: Safety license for 1 axis
● K02: Safety license for 2 axes
● K03: Safety license for 3 axes
● K04: Safety license for 4 axes
● K05: Safety license for 5 axes
Note
Presently, a maximum of 5 safety axes with Safety Integrated Extended functions are
possible on a Control Unit CU320-2.
Licenses
The required licenses can be optionally ordered together with the CompactFlash Card.
Subsequent licensing is realized in the Internet using the "WEB License Manager" by
generating a license key:
http://www.siemens.com/automation/license
Note
The generation of the license key is described in detail in the SINAMICS S120 Function
Manual, Chapter "Basics of the drive system" under "Licensing".
Activation
The associated license key is entered into parameter p9920 in the ASCII code. The license
key is activated using parameter p9921 = 1.
Diagnostics
An insufficient license is indicated via the following alarm and LED:
● Alarm A13000 → License not sufficient
● LED READY → Flashes green/red at 0.5 Hz
Cabinet Modules
Manual, 03/2013, A5E03263538A
8.7 K01 to K05, safety license for 1 to 5 axes
Options
383