M60, Additional Shock Protection - Siemens SINAMICS S120 Manual

Options

8.50 M60, additional shock protection

Note
Opening angle of the door
The door opening angle with free-standing cabinet units is 180°.
With a side-by-side configuration of the cabinet units, this opening angle is 130°.
For degrees of protection IP23/IP43/IP54 and with option L37 (DC interface incl. pre-
charging input circuit), the door opening angle is only 110° .
8.50 M60, additional shock protection
Availability of option
This option is available for the following S120 Cabinet Modules:
● Line Connection Modules
● Basic Line Modules
● Smart Line Modules
● Active Line Modules
● Motor Modules in chassis format
Description
The standard Cabinet Modules are designed according to BGV A 3. With option M60,
additional covers (out of reach of accessible control and contact elements) are installed
upstream of the power unit.
Safety information
Note
Do not operate without cabinet door(s)
The additional shock protection (option M60) is not a substitute for the cabinet door(s).
Cabinets must not be operated without cabinet door(s)!
538
Cabinet Modules
Manual, 03/2013, A5E03263538A