Setting Up The Ctc Computer - Cisco ONS 15327 User Documentation

Chapter 2 Software Installation
b.
Set the JRE reference:
Step 2
a.
b.
c.
d.
Note

Setting Up the CTC Computer

Before you run CTC on your Windows PC or Solaris workstation, you need to set up the computer for
the specific method you will use to connect to the ONS 15327.
to the ONS 15327. Use the table to find the connection method you will use and check the Requirements
column before performing the set up procedures.
Note
June 2002
set path = ( /usr/openwin/bin $NETSCAPE $path)
If you are using the ksh or bash shell, edit the .profile file in your home directory by appending the
file with the lines:
JRE=[your JRE path]
NETSCAPE=[your Netscape path]
NPX_PLUGIN_PATH=$JRE/j2re1_3_1_02/plugin/sparc/ns4
PATH=/usr/openwin/bin:$NETSCAPE:$PATH
export JRE NPX_PLUGIN_PATH PATH
Run the Control Panel by typing:
[JRE path]/j2re1_3_1_02/bin/ControlPanel
Click the Advanced tab.
From the combo box, select [JRE path]/j2rel1_3_1_02. If the JRE is not found, select other and
enter the following in the Path text box:
[JRE path]/j2re 1_3_1_02
Click Apply. Go to the "Connecting PCs to the ONS 15327" procedure on page
If you are running multiple shells, before your new environment variable will be set you may
need to invoke the same shell for which you changed the initialization file (for example, if you
added the environment variable to the .cshrc file, you must run your browser under the csh shell).
For initial shelf turn up, you must use a local connection to the ONS 15327.
Running the CTC Installation Wizard
2-20.
Table 2-3 lists the methods for connecting
Cisco ONS 15327 User Documentation
2-9