OC48 IR 1310 Card
•
•
•
13.8 OC48 IR 1310 Card
This section describes the features and functions of the OC48 IR 1310 card. Refer to this section for
general information about the OC48 IR 1310 card.
13.8.1 OC48 IR 1310 Card Description
The OC48 IR 1310 card provides one intermediate-reach, Telcordia-compliant, GR-253 SONET OC-48
interface per card. Each interface operates at 2488.320 Mbps over a single-mode fiber span and supports
VT payloads and non-concatenated or concatenated payloads for STS-1, STS-3c, STS-6c, STS-12c, or
STS-48c.
functionality.
Figure 13-14 OC48 IR 1310 faceplate
You can install the OC48 IR 1310 card in any ONS 15327 high-speed card slot and provision the card as
a drop or span card in a two-fiber BLSR, UPSR, or in an ADM (linear) configuration.
Cisco ONS 15327 User Documentation, R3.3
13-18
Min. Transmitter Output Power: -3 dBm
–
–
Center Wavelength: 1480 nm - 1580 nm
Nominal Wavelength: 1550 nm
–
Transmitter: DFB Laser
–
Receiver
Max. Receiver Level: -7 dBm
–
Min. Receiver Level: -29 dBm
–
Receiver: InGaAs/InP photo detector
–
–
Link Loss Budget: 26 dB
Environmental
Eye safety compliance: Class I
–
Operating Temperature: -40 to +65 degrees Celsius
–
Operating Humidity: 5 - 95%, non-condensing
–
Power Consumption: 14 W, .29 AMPS, 48 BTU/Hr
–
Dimensions
Height: 1.080 in.
–
–
Width: 4.280 in.
Depth: 9.172 in.
–
Figure 13-14
shows the OC48 IR 1310 faceplate and
Tx
Rx
FAIL
ACT
SF
Chapter 13
Card Reference
Figure 13-15
diagrams the card's
June 2002