Set Up The Java Runtime Environment For Unix - Cisco ONS 15327 User Documentation

Running the CTC Installation Wizard
Click Next. The CTC online help is installed. When installed, the policy file selection is displayed.
Step 15
Step 16 Choose the JRE policy file to modify:
•
•
Click Next, then click Finish.
Step 17
Note
If your installation included the JRE (that is, you chose the Typical installation or selected JRE from the
Step 18
custom installation), go to the
page
Note
Procedure: Set Up the Java Runtime Environment for UNIX
In this task,
Note
Environment during JRE installation. For example, if your JRE destination directory is /usr/bin/jre,
substitute /usr/bin/jre
Netscape path]
your actual Netscape destination directory path.
CTC requires that the location of xterm is also in your path. If you have, for some reason, moved xterm
Note
from its default location,
the procedures below to reflect the actual path where xterm exists on your system.
Set up the environment variable:
Step 1
a.
Cisco ONS 15327 User Documentation
2-8
Choose User Policy File (default) to create a policy file that applies only to your user profile. This
file will not be overwritten if you upgrade or reinstall the JRE. If you are the only computer user
who will access an ONS 15327, choose this option.
Select System Policy File to modify the system JRE policy file. This policy file applies to all
computer users. If more than one individual will use this computer to access the ONS 15327, choose
this option. However, if you reinstall or upgrade the JRE, the system policy file is overwritten and
you will need to run the CTC Installation Setup program again to modify it.
Be sure to record the names of the directories you choose for Netscape, JRE, and the online
documentation.
2-8l.
The Java Runtime Environment (JRE) may require certain patches to run properly. The patch tar
file can be found in the JRE/Solaris directory on the CD. Please read the JRE/Solaris/Solaris.txt
file for more information. In addition to installing any needed patches, follow the procedures
below to set up JRE for use with Cisco Transport Controller on your UNIX system.
[your JRE path]
wherever
,
refers to the destination directory you chose for Netscape, and must be substituted with
/usr/openwin/bin
If you are using the csh shell, edit the .cshrc file in your home directory by appending the file with
the lines:
setenv JRE [JRE path]
setenv NETSCAPE [Netscape path]
setenv NPX_PLUGIN_PATH $JRE/j2re1_3_1_02/plugin/sparc/ns4
"Set Up the Java Runtime Environment for UNIX" procedure on
represents the destination directory you chose for the Java Runtime
occurs. Also, in the following procedures,
[your JRE path]
, you must change all occurrences of
Chapter 2 Software Installation
[your
/usr/openwin/bin
June 2002
in