Figure 12-7 Resetting The Xtc Card - Cisco ONS 15327 User Documentation

Chapter 12 Maintenance

Figure 12-7 Resetting the XTC card

Physically replace the remaining XTC-14:
Step 3
Unscrew and open the XTC-14 card ejector.
a.
b. Slide the card out of the slot. This raises the
is complete.
Open the ejector on the XTC-28 card.
c.
Slide the XTC-28 card into the slot along the guide rails.
d.
Close the ejector and secure the screw.
e.
Wait until the XTC-28 is fully booted and finishes synchronizing its software and database.
Step 4
June 2002
XTC-14 Card to XTC-28 Card Upgrade
alarm which will clear when the upgrade
IMPROPRMVL
Cisco ONS 15327 User Documentation, R3.3
12-11