Figure 10-1 Viewing Alarms In Ctc Node View; Table 10-1 Alarms Column Descriptions - Cisco ONS 15327 User Documentation

Viewing ONS 15327 Alarms

Table 10-1 Alarms Column Descriptions

Column
New
Date
Node
Object
Type
Slot
Port
Sev
ST
SA
Cond
Description
Num
Ref

Figure 10-1 Viewing alarms in CTC node view

Alarms are displayed in one of five background colors, listed in
alarm severity. Events, conditions, and cleared alarms are also color-coded. Conditions and events are
displayed in the History or Conditions tab.
Cisco ONS 15327 User Documentation, R3.3
10-2
Information Recorded
Indicates a new alarm. To change this status, check either the Synchronize Alarms or
Delete Cleared Alarms check box, or reset the active TCC+ card.
Date and time of the alarm.
Node where the alarm occurred (displayed in network view only).
TL1 access identifier (AID) for the alarmed object.
Card type in this slot.
Slot where the alarm occurred (displayed in network and node view only).
Port where the alarm occurred.
Severity level: CR (critical), MJ (major), MN (minor), NA (not alarmed), NR (not
reported).
Status: R (raised), C (clear), T (transient).
When checked, indicates a service-affecting alarm.
The error message/alarm name.
Description of the alarm.
A count of incrementing alarm messages (hidden by default).
The reference number assigned to a cleared alarm (hidden by default).
Chapter 10 Alarm Monitoring and Management
Table 10-2, to quickly communicate the
June 2002