Figure 5-32 Deleting A Protection Group - Cisco ONS 15327 User Documentation

Chapter 5 SONET Topologies
Click Yes on the confirmation dialog box.
e.
Step 5 Repeat Step 4 for each group in the 1+1 Protection Groups list at all nodes that will be converted.
For each node, delete the 1+1 OC-N protection group that supports the linear ADM span:
Step 6
Note
Click the Provisioning > Protection tabs
a.
From the Protection Groups list, choose the 1+1 group you want to delete. Click Delete.
b.
Click Yes on the confirmation dialog box.
c.
Verify that no traffic disruptions are indicated on the test set. If disruptions occur, do not proceed.
d.
Recreate the protection group and isolate the cause of the disruption.
Continue deleting 1+1 protection groups while monitoring the existing traffic with the test set.
e.

Figure 5-32 Deleting a protection group

June 2002
Deleting a 1+1 protection group may cause unequipped path (UNEQ-P) alarms to occur.
(Figure 5-32).
Cisco ONS 15327 User Documentation, R3.3
Linear ADM Configurations
5-37