Provisioning Electrical Cards; Table 7-1 Ds-N Card Provisioning Overview - Cisco ONS 15327 User Documentation

Provisioning Electrical Cards

7.2 Provisioning Electrical Cards
The ONS 15327 electrical cards (DS-1 ports on the XTC-14 and XTC-28-3 and DS-3 ports on the
XTC-28-3) are pre-provisioned with settings that you can modify to manage transmission quality. When
you open an XTC card in CTC and select the Provisioning tab, the following subtabs are commonly
displayed:
•
•
•
•
•
•
Table 7-1
card).
Table 7-1
Subtab
Line
Line Threshold
Electric Path
Threshold
Cisco ONS 15327 User Documentation, R3.3
7-2
Line—Sets line setup parameters, such as line coding and line length. This is also where you put
ports in and out of service.
Line Threshold—Sets the line-level PM thresholds.
Electric Path Threshold—Sets the path-level PM thresholds for DS-1 traffic.
STS 1 Path Threshold—Sets the path-level PM thresholds for DS-3 traffic.
SONET Path Threshold—Sets the path-level PM thresholds for (STS/VT1.5) traffic.
Alarming—Sets alarm profiles for individual ports and suppresses alarms. See
Monitoring and Management"
provides an overview of DS-1 and DS-3 parameters (an X means the item is available for the
DS-N Card Provisioning Overview
Provisioning Item
Port #
Port Name
Line Type
Detected Line Type
Line Coding
Line Length
Status
Port
CV
ES
SES
LOSS
Port
CV
ES
SES
SAS
AIS
UAS
for information about alarm profiles and alarm suppression.
DS1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Chapter 7 Card Provisioning
Chapter 10, "Alarm
DS3
X
X
X
X
X
X
X
X
X
June 2002