Figure 7-2 Provisioning Thresholds For The Oc48 Ir 1310 Card - Cisco ONS 15327 User Documentation

Provisioning Optical Cards
Table 7-5
Heading
PJ Sts Mon #
Status
Type
Click Apply.
Step 4
Procedure: Provision Threshold Settings for OC-N Cards
Step 1 Display the OC-N card in CTC card view
Step 2 Click the Provisioning > Thresholds tabs.
Figure 7-2
Modify the settings shown in
Step 3
Default thresholds apply to all optical cards unless otherwise specified.
Cisco ONS 15327 User Documentation, R3.3
7-12
OC-N Card Line Settings on the Provisioning > Line Tab (continued)
Description
Sets the STS that will be used for pointer
justification. If set to 0, no STS is monitored. Only
one STS can be monitored on each OC-N port. See
the "Pointer Justification Count Reference" section
on page 8-13 for more information.
Places port in or out of service
Defines the port as SONET or SDH.
Provisioning thresholds for the OC48 IR 1310 card
Table 7-6 on page
(Figure 7-2 on page 7-12).
7-13.
Chapter 7 Card Provisioning
Options
0 (default) - 3 (OC-3, per
•
port)
0 (default) - 12 (OC-12)
•
0 (default) - 48 (OC-48)
•
Out of Service (default)
•
• In Service
Sonet only
June 2002