Using The Performance Monitoring Screen; Viewing Pms; View Pms; Figure 8-1 Viewing Performance-Monitoring Information - Cisco ONS 15327 User Documentation

Using the Performance Monitoring Screen

8.1 Using the Performance Monitoring Screen

The following sections describe how to use basic screen elements such as tabs, menus, and informational
columns.
Figure 8-1

8.1.1 Viewing PMs

Before you view PMs, be sure you have created the appropriate circuits and provisioned the card
according to your specifications. For information about circuit creation and card provisioning, see
Chapter 6, "Circuits and Tunnels"
Note Rows relating directly to a card port are always present. Rows relating to an STS or virtual tunnel (VT)
carried on the port appear at the time of circuit creation.
Procedure: View PM s
Open the desired electrical or optical card. Double-click the card graphic in the main (node) view or
Step 1
right-click the card and select Open Card. (Clicking a card once only highlights the card.)
Cisco ONS 15327 User Documentation, R3.3
8-2
Figure 8-1 shows the Performance tab of Cisco Transport Controller (CTC) card-level view.
Viewing performance-monitoring information
Performance tab
and
Card view
Chapter 7, "Card Provisioning."
Chapter 8 Performance Monitoring
June 2002