Cisco ONS 15327 User Documentation page 103

Chapter 2 Software Installation
Table 2-8 Setting Up Windows 95/98, Windows NT, and Windows 2000 PCs for Direct ONS 15327 Connections
Windows 95/98
From the Windows Start menu,
1.
choose Settings > Control Panel.
On the Control Panel dialog box,
2.
click the Network icon.
In the Network dialog box select
3.
TCP/IP for your PC Ethernet card,
then click Properties.
On the TCP/IP Properties dialog
4.
box, click the DNS Configuration
tab and choose Disable DNS.
5. Click the WINS Configuration tab
and choose Disable WINS
Resolution.
Click the IP Address tab.
6.
In the IP Address window, click
7.
Specify an IP address.
In the IP Address field, enter an IP
8.
address that is identical to the ONS
15327 IP address except for the last
three digits. The last three digits
must be between 1 and 254.
In the Subnet Mask field, type
9.
255.255.255.0.
Click OK.
10.
On the TCP/IP dialog box, click the
11.
Gateway tab.
In the New Gateway field, type the
12.
ONS 15327 IP address. Click Add.
Verify that the IP address displays
13.
in the Installed Gateways field,
then click OK.
When the prompt to restart your PC
14.
displays, click Yes.
Test the connection:
Step 3
a.
b.
c.
June 2002
Windows NT
From the Windows Start menu,
1.
choose Settings > Control Panel.
On the Control Panel dialog box,
2.
click the Network icon.
In the Network dialog box click the
3.
Protocols tab, choose TCP/IP
Protocol, then click Properties.
Click the IP Address tab.
4.
In the IP Address window, click
5.
Specify an IP address.
6. In the IP Address field, enter an IP
address that is identical to the ONS
15327 IP address except for the last
three digits. The last three digits
must be between 1 and 254.
In the Subnet Mask field, type
7.
255.255.255.0.
Click OK.
8.
On the TCP/IP Properties dialog
9.
box, type the ONS 15327 IP
address in the Default Gateway
field.
Click Apply.
10.
In some cases, Windows NT will
11.
prompt you to reboot your PC. If
you receive this prompt, click Yes.
Start Netscape Navigator or Internet Explorer.
Enter the Cisco ONS 15327 IP address in the web address (URL) field. If the connection is
established, a Java Console window, CTC caching messages, and the Cisco Transport Controller
Login dialog box display. If this occurs, go to Step 2 of the
page 2-24 to complete the login. If the Login dialog box does not appear, complete Steps c and d.
From the Windows Start menu, choose the MS-DOS or command prompt.
Connecting PCs to the ONS 15327
Windows 2000
From the Windows Start menu,
1.
choose Settings > Network and
Dial-up Connections > Local Area
Connection.
2. On the Local Area Connection
Status dialog box, click Properties.
3. On the General tab, choose Internet
Protocol (TCP/IP), then click
Properties.
4. Click Use the following IP address.
5. In the IP Address field, enter an IP
address that is identical to the ONS
15327 IP address except for the last
three digits. The last three digits
must be between 1 and 254.
In the Subnet Mask field, type
6.
255.255.255.0.
In the Default Gateway field, type
7.
the ONS 15327 IP address.
Click OK.
8.
"Log into the ONS 15327" procedure on
Cisco ONS 15327 User Documentation
2-21