Figure 8-12 Pm Read Points On The Xtc Ds1 Cards - Cisco ONS 15327 User Documentation

Chapter 8 Performance Monitoring

Figure 8-12 PM read points on the XTC DS1 cards

Tx/Rx
Table 8-3
Parameter
DS1 CV-L
DS1 ES-L
DS1 SES-L
DS1 LOSS-L
June 2002
XTC Card (DS1 Ports)
LIU
DS1 Tx AISS-P
DS1 Tx CV-P
DS1 Tx ES-P
DS1 Tx SAS-P
DS1 Tx SES-P
DS1 Tx UAS-P
DS1 CV-L
DS1 ES-L
DS1 SES-L
DS1 LOSS-L
DS1 Rx AISS-P
DS1 Rx CV-P
DS1 Rx ES-P
DS1 Rx SAS-P
DS1 Rx SES-P
DS1 Rx UAS-P
PMs read on LIU
DS1 Line PMs for the XTC DS1 Cards
Definition
Code Violation Line (CV-L) indicates the number of coding violations
occurring on the line. This parameter is a count of bipolar violations
(BPVs) and excessive zeros (EXZs) occurring over the accumulation
period.
Errored Seconds Line (ES-L) is a count of the seconds containing one or
more anomalies (bipolar violations + excessive zeros, or BPV + EXZ)
and/or defects (loss of signal) on the line.
Severely Errored Seconds Line (SES-L) is a count of the seconds
containing more than a particular quantity of anomalies (bipolar
violations + excessive zeros, or BPV + EXZ > 1544) and/or defects on the
line.
Loss of Signal Seconds Line (LOSS-L) is a count of one-second intervals
containing one or more Loss of Signal (LOS) defects.
Performance Monitoring for Electrical Cards
ONS 15327
Framer
DS1 Side
SONET Side
CV-V
ES-V
VT
SES-V
Level
UAS-V
STS CV-P
STS ES-P
Path
STS FC-P
Level
STS SES-P
STS UAS-P
PMs read on Framer
Cisco ONS 15327 User Documentation, R3.3
Cross Connect OC-N
BTC
8-17