E10/100-4 Card
13.10.2 E10/100-4 Card-Level Indicators
The E10/100-4 card faceplate has two card-level LED indicators
Table 13-7 E10/100-4 Card-Level Indicators
Card-Level Indicators
Red FAIL LED
Green ACT LED
SF LED
13.10.3 E10/100-4 Port-Level Indicators
The E10/100-4 card also has 4 pairs of LEDs (one pair for each port) to indicate port conditions
(Table
messages.
Table 13-8 E10/100-4 Port-Level Indicators
LED State
Amber
Solid Green
Green Light Off
Cisco ONS 15327 User Documentation, R3.3
13-24
Description
The red FAIL LED indicates that the card's processor is not ready or
catastrophic software failure occurred on the E10/100-4 card. As part of the
boot sequence, the FAIL LED is turned on until the software deems the card
operational.
A green ACT LED provides the operational status of the E10/100-4. When
the ACT LED is green it indicates that the E10/100-4 card is active and the
software is operational.
Not use.
13-8). See
Chapter 14, "Alarm Troubleshooting"
Description
Transmitting and Receiving
Idle and Link Integrity
Inactive Connection or Unidirectional Traffic
Chapter 13
(Table
13-7).
for a complete description of the alarm
Card Reference
June 2002