Seal On Pc Slide-In Module; Pc Diagnostics Tool; Starting The Diagnostic Tool - Sirona Cerec AC Operating Instructions Manual

Dental cad/cam system acquisition unit
Hide thumbs Also See for Cerec AC:
Table of Contents

Advertisement

10 Appendix

10.3 Seal on PC slide-in module

58
Operating Instructions for the Acquisition Unit Sirona Dental CAD/CAM System
10.3
Seal on PC slide-in module
Seal on PC slide-in module
Text seal
NOTICE
If the seal is broken, all warranty claims regarding the PC slide-module
automatically expire.
The PC slide-in module may be opened only by an authorized dental
technician. Only spare parts approved by us may be used in this module.
Following a repair, the seal supplied along with the spare parts must be
affixed at the specified location (A).
10.4

PC diagnostics tool

PC diagnostics tool
10.4.1

Starting the diagnostic tool

Starting the diagnostic tool
Test
Customer Diagnostics
Technician Diagnostics
Sirona Windows Diagnostics
Tip: If one of the following steps does not work, further steps can be found
in the Service Manual.
The PC is switched off.
1. Switch on the PC and wait until the above message appears.
2. Hold down the "F11" key on the keyboard until the boot menu
appears.
Sirona Dental Systems GmbH
Suitable for
Suitable for the user, in order to check
the PC components.
Suitable for the technician, in order to
check the PC components.
Windows Stress Test, in order to test
the PC at permanent load.
63 33 582 D3492
D3492.201.01.09.23 09.2011

Advertisement

Table of Contents
loading

Table of Contents