Table of Contents
Advertisement
Field
Warning-UpperLimit
Alarm-UpperLimit
Shutdown-UpperLimit
Displaying the operational statistics of the device
When you perform routine maintenance or the system fails, you might need to view the operational
information of each functional module for locating failures. Typically you need to run
commands one by one. To collect more information one time, you can execute the
diagnostic-information
multiple functional modules of the device.
•
Save the operational statistics of each functional module of the device:
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.tar.gz)[sda0:/diag.tar.gz]:
Diagnostic information is outputting to sda0:/diag.tar.gz.
Please wait...
Save successfully.
To view the diag.gz file:
a. Execute the
decompress the file.
b. Execute the
c. Execute the
d. Press Page Up and Page Down.
•
Display the operational statistics for each functional module of the device:
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
===============================================
===============display clock===============
11:03:38 UTC Sat 01/13/2018
=================================================
...
Displaying transceiver module information
Identifying transceiver modules
To identify transceiver modules, you can use the following command to view the key parameters of
the transceiver modules. The key parameters include transceiver module type, connector type,
central wavelength of the laser sent, transmission distance, and vendor name.
To display transceiver module information:
Task
Display key parameters of the
Description
Warning-level high temperature alarm threshold.
Alarm-level high temperature alarm threshold.
Shutdown-level high temperature alarm threshold. The device automatically
powers off when the temperature exceeds this threshold.
command in any view to display or save the operational statistics of
tar extract archive-file
diag.gz command.
gunzip
diag command.
more
Command
display transceiver
diag.tar.gz command in user view to
5-5
display
display
Remarks
Available for all transceiver
Advertisement
Table of Contents
