Displaying Cpu Usage Statistics - H3C SecPath U200 Series Installation Manual

<Sysname> display device manuinfo
slot 0
DEVICE_NAME:Navigator2-2
DEVICE_SERIAL_NUMBER:210231A91NA08B000004
MAC_ADDRESS:000f-e2ec-2ce0
MANUFACTURING_DATE:2009-1-13
VENDOR_NAME:H3C
Use the display device manuinfo slot slot-number command to display the electronic label data for
•
the interface module that is specified by the slot slot-number option.
<Sysname> display device manuinfo slot 0
DEVICE_NAME:Navigator2-2
DEVICE_SERIAL_NUMBER:210231A91NA08B000004
MAC_ADDRESS:000f-e2ec-2ce0
MANUFACTURING_DATE:2009-1-13
VENDOR_NAME:H3C
Table 12 Command output
Field
The operation is not
supported on the specified
board or subslot

Displaying CPU usage statistics

Use the display cpu-usage command to display CPU usage statistics.
<Sysname> display cpu-usage
Unit CPU usage:
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
Table 13 Command output
Field
Unit CPU usage
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
Description
The method that uses the display device manuinfo command to display the
electronic label data for interface modules is not supported.
Description
CPU usage statistics
After a boot, the system calculates and records the average CPU usage rate
every five seconds.
This field displays the average CPU usage rate in the last five seconds.
After a boot, the system calculates and records the average CPU usage rate
every one minute.
This field displays the average CPU usage rate in the last minute.
After a boot, the system calculates and records the average CPU usage rate
every five minutes.
This field displays the average CPU usage rate in the last five minutes.
46