Flexi Arm - Pyronix 256 System Manual

13.12.4 Flexi Arm

If enabled, the user will be able to select which partitions they can arm/disarm, from those the code is valid
for. If disabled, the user code will automatically arm in the selected partition(s). This option is commonly
used if a proximity tag has been used on the system.
V i s u a l K e y p a d P r o g r a m m i n g P r o c e d u r e
Change Codes
Using the and
CODES? Press the
5 Digit Pins
Enter : for No
Enter : for Yes (Grade 3)
Press the key
Change Duress Codes
Press the key to Change the Duress Codes, or for
the next function press the
Duress Codes
Enter the required User Number using the numeric
keys.
Press the key
If a code or tag is already allocated, the display will
show [******]. Enter the new code, or present a
tag to keypad. To erase the existing code press the
key. Press the
User Type
Enter : for Duress
Enter : for Guard
Press the key. (User codes can only be
changed in the user manager mode)
RINS871-3
C H A N G E C O D E S
keys, scroll to 'CHANGE
key
key.
key
P C X S M S A N D P C X 2 5 6 S Y S T E M M A N U A L
Page: 69