Dial Out Menu; Dial Out Menu On The Pcx 26/Sms - Pyronix 256 System Manual

1 3 . 2 5 D i a l O u t M e n u
The Dial Out Menu can be used to dial to a remote PC (rather than the PC dialling the control panel). The
modem telephone numbers can be programmed in 'Set Up Downloading' – see page: 95.
The following actions can be performed: Connect to PC, Test Dial, Arm Service (You must use the ARM
software for this), Data from PC, Data to PC, Diagnostics and Commissions.

13.25.1 Dial Out Menu on the PCX 26/SMS

Please note that when entering the 'Dial Out Menu' function on the PCX 26/SMS panel, a message will
appear: "Are You Sure?", once the
V i s u a l K e y p a d P r o g r a m m i n g P r o c e d u r e

Dial Out Menu

Using the and
MENU'. Press the
Enter the PC number you wish to dial.
Press the key.
Please note that when entering the 'Dial Out
Menu' function on the PCX 26/SMS panel, a
message will appear: "Are You Sure?", once the
key is pressed the system will dial the PC and
pull all the data back.
Select Operation
Enter : for Connect to PC
Enter : for Test Dial
Enter : for Arm Service
Enter : for Data from PC
Enter : for Data to PC
Enter : for Diagnostics
Enter : for Commissions
Press the key
If the call fails, check your telephone connections and
modem numbers.
Press the key. You will be returned to the
Engineer Menu.
RINS871-3
key is pressed the system will dial the PC and pull all the data back.
D I A L O U T M E N U
keys, scroll to 'DIAL OUT
key.
P C X S M S A N D P C X 2 5 6 S Y S T E M M A N U A L
Page: 109