User Arm Options; Flexi Arm - Pyronix PCX-256 Programming Manual

5.12.3 User Arm Options

The User Codes can be programmed as the following:
Disarm/Arm: The code will arm and disarm the PCX system (Default)
Disarm Only: The code will only disarm the PCX system once it is fully armed.
Arm Only: The code will only arm the PCX system.
None: The code will not be used to arm and disarm the system.

5.12.4 Flexi Arm

If enabled, the user will be able to select which partitions they can arm/disarm, from those the code
is valid for.
If disabled, the user code will automatically arm in the selected partition(s). This option is
commonly used if a proximity tag has been used on the system. (Default for Duress Codes)
Change Codes
Using the and
CODES? Press the
5 Digit Pins
Enter : for No
Enter : for Yes (Grade 3) (Default)
Press the key
Change Duress Codes
Press the key to Change the Duress Codes,
or for the next function press the
NOTE: User codes can only be changed in
the user manager mode
Duress Codes
Enter the required User Number using the
numeric keys.
Press the key
If a code or tag is already allocated, the display
will show [******]. Enter the new code, or
present a tag to keypad. To erase the existing
code press the
RINS868-6
V i s u a l K e y p a d P r o g r a m m i n g P r o c e d u r e
C H A N G E C O D E S
keys, scroll to 'CHANGE
key
key.
key. Press the key
PCX 256 PROGRAMMING MANUAL
Page: 33