Exit Modes; Timed; Final Door; Timed/Final - Pyronix 256 System Manual

Day
Adjust the day using the numeric keys
Press the key
Hours
Adjust the hours using the numeric keys
Press the key
Minutes
Adjust the minutes using the numeric keys
Press the key
You will be returned to the Engineer Menu.
1 3 . 1 1 E x i t M o d e s

13.11.1 Timed

The PCX system will only arm when the programmed Exit Time has expired (See 'Change Timers' page 66)
providing that all inputs are closed.

13.11.2 Final Door

The PCX system will only arm when an input programmed as Entry/Exit (EE) is either closed (if the input was
opened when arming started) or its single opening and then closing (if the input was closed).
This mode may also be used for 'lock arm' operation: securing the lock completes the arming procedure,
unlocking starts the entry time.

13.11.3 Timed/Final

This function follows 'timed' operation, except that the timer will be overridden if an Entry/Exit input is opened
and closed before the timer expires (See above: Final Door).

13.11.4 PTS (Push To Set)

PTS = Push to Set. The PCX system will only arm when a 'Push to Set' button has been pressed. This
function will override the programmed Exit Time.
V i s u a l K e y p a d P r o g r a m m i n g P r o c e d u r e

Exit Modes

Using the and
Press the key
RINS871-3
E X I T M O D E S
keys, scroll to 'EXIT MODES?
P C X S M S A N D P C X 2 5 6 S Y S T E M M A N U A L
Page: 67