F: Arming / Disarming With The Tag Reader; G: Open Doors / Arm And Disarm (Entry Control) - Pyronix PCX 46 User Manual

F: Arming / disarming with the tag reader

If you have a tag reader installed, then it will be possible to arm and disarm the alarm system using a tag.
Disarmed

G: Open doors / Arm and Disarm (Entry Control)

A tag reader can also be used to unlock entry doors.
Disarmed
External Reader Instructions:
Arming: Present a valid tag to the reader, the GREEN LED will illuminate on the external reader, remove the tag, the door will unlock, then present the
same tag within 10 seconds and the system will arm and the door will lock.
Disarming: Present a valid tag to the reader and then remove it, the status will be shown (the alarm symbol will illuminate indicating the system is
armed on the internal reader and the RED LED on the external reader), present the same tag wihthin 10 seconds again and the system will be disarmed,
and the door will unlock.
Access Control/Entry Control: The readers can be used also for opening doors only without the ability to arm and disarm. Please contact your
installer for more information on this feature.
8
NOTE: If the PCX 46 has failed to set, a fault will be displayed on the internal tag reader
Armed
NOTE: If the PCX 46 has failed to set, a fault will be displayed on the internal tag reader
Locked Armed
Disarmed
or a fail to set sound will activate on the external tag reader buzzer.
Disarmed Locked
or a fail to set sound will activate on the external tag reader buzzer.
Armed
Armed