Table of Contents
Advertisement
If this function is enabled, the engineer will require authorisation from the user to access the Engineers
menu.
1. Use the
and
2. Select the following:
Enter '0' = No – To disallow engineer access (only accessible from the manager mode)
Enter '1' = Yes – To allow engineer access
3. Press the
key, you will be returned to the engineer menu.
PLEASE NOTE THIS FEATURE ISNT AVAILABLE ON THE PCX 26/SMS
Your alarm may be configured so that your alarm installation company or company manager can arm or
disarm the system remotely via the PC. Should you wish to block this access, select 'Yes' for this function.
1. Use the
and
2. Select the following:
Enter '0' = No – To block remote arming
Enter '1' = Yes – To allow remote arming
3. Press the
key, you will be returned to the engineer menu.
If this function is enabled, connecting to the PCX system via the PC software (upload/download software) will
be only allowed in the Engineers Mode.
1. Use the
and
2. Select the following:
Enter '0' = No – To allow upload/download access
Enter '1' = Yes – To block upload/download access
3. Press the
key, you will be returned to the engineer menu.
This function will tell you if there are any engineer / anti-code features turned on.
You must enter your anti-code / engineer code to fully reset the system.
Select this option to save any changes you have made, and return to disarmed mode.
A l l o w E n g i n e e r M e n u
keys to scroll to 'ALLOW ENGR MENU'. Press the
B l o c k R e m o t e A r m
keys to scroll to 'BLOCK REMOTE ARM'. Press the
B l o c k U D L
keys to scroll to 'BLOCK UDL'. Press the
E n t e r A n t i - C o d e
E x i t M a n a g e r M o d e
key.
key.
key.
Advertisement
Table of Contents
