Guard; Code Types And Numbers; User Types; User Arm Options - Pyronix 256 System Manual

P C X S M S A N D P C X 2 5 6 S Y S T E M M A N U A L
Enter : for Timed
Enter : for Final Door
Enter : for Timed/Final
Enter : for Push To Set
Press the key
Repeat for each partition or press the
to the Engineer Menu.
1 3 . 1 2 C h a n g e C o d e s ( D u r e s s / G u a r d O n l y )
All codes may be 4, 5, or 6 digit or proximity tags. Using a 5 or 6 digit code will automatically block several
possible 4 digit codes that clash with it. Please note that the PCX System will only comply with Grade 3 if
you have "5 digit codes" enabled.
NOTES: Only Duress or Guard codes can be changed by the Engineer, Normal user codes can only
be changed in The Manager Mode. See page: 40. The Master User and Engineer Codes cannot be
deleted.

13.12.1 Code Types and Numbers.

PCX System
PCX 26/SMS
PCX 256

13.12.2 User Types

User Type
User
Default: 1234
Manager
Manager Manager
Default: 5678
Engineer
Default: 9999
Duress

Guard

13.12.3 User Arm Options

The User Codes can be programmed as the following:
Disarm/Arm: The code will arm and disarm the PCX system
Disarm Only: The code will only disarm the PCX system once it is fully armed.
Arm Only: The code will only arm the PCX system.
None: The code will not be used to arm and disarm the system.
Page: 68
key to return
User/Manager Codes
20
500
Functions
Arm and Disarm System
Also for Access Control and Sub Partition Control
functions
Arm and Disarm System
Also access to Manager menu functions
Arm and Disarm System.
Also access to Manager menu functions
Access to all engineering functions, also
arm/disarm system for test purposes.
Disarm system, generating silent 'Duress' or 'Hold
Up' signal
Disarm system, but only after an alarm has been
active for a minimum time (programmable). Also
arm system. An output type is available to signal
whenever this code is used.
Duress/Guard Codes
10
20
Operation
Programmed by
Manager only.
Programmed by
Manager only.
Programmed by
Manager or Engineer.
Programmed by
Engineer.
Programmed by
Engineer.
Programmed by
Engineer.
RINS871-3