Programming Sms Texts - Pyronix 256 System Manual

13.23.3 Programming SMS Texts

The PCX system also has the facility of sending an SMS to a mobile phone when an alarm has occurred.
This facility can be programmed using the content type the protocol Contact ID uses.
Content Types
01 Arm
02 Disarm
03 Special Disarm
04 Arm Fail
05 Alarm
06 First alarm
07 Alarm Silenced
08 Confirmed
09 LoTechFault
10 HiTechFault
11 Tech Info
12 Manager Info
13 Engineer Info
14 *AccessC Alarm
15 *AccessC Info
16 *AccessC Ref
17 *SL SwitchOn
18 *SL SwitchOff
19 *SL OtherOn
20 *SL OtherOff
21 *Sub-partitions Set
22 *Sub-partitions
Unset
23 *Sub-partitions
Alarm
24 Input Omitted
25 Input Restore
26 Test Call
27 Mains fail
28 Emergency input
29 Emergency
Restore
30 Tamper input
31 First Tamper input
32 Tamp Input
Restore
*Not available in the PCX 26/SMS
RINS871-3
P C X S M S A N D P C X 2 5 6 S Y S T E M M A N U A L
All arm events (by area/level & user name)
All disarm events (by area/level & user name)
Disarm events initiated by codes 15 to 20 only
Attempt to arm the system failed
All alarm events (by partition, level and type) inc. code guess (excludes
tampers and emergency input types)
First to alarm event (for each input) only
Any alarm/fault silenced (by partition)
Sequentially confirmed alarm
Telecom Line restore (STU/ATE or DigiModem)
Low volts, Battery fault/OK, Fuse failure, RS-485 or Device Failure
System restart, Over current, Logs cleared
Code changed / deleted
Engineer accessing system, and leaving
Access Control door forced or left open
Access Control tag at Reader
Access refused (invalid code)
+Switcher input active
+Switcher input restored
+Other input active
+Other input restored
Arming events for sub-partitions
Disarming events for sub-partitions
Alarm event in a sub-partition
Input omitted at rearm.
Restore of type 05
Do not Use
Mains fail/restore
Fire, Gas, HU, 2-key HU, Duress Code used
Restore of Fire, Gas, HU.
Tamper, Day alarm, and Trouble input types. Tamper on input, case tamper
and SAB tamper.
First to alarm of tamper input.
Restore of a tamper.
+ - Signalled ONLY for inputs with 'Special Logged'
attribute.
Page: 105