Pyronix 256 System Manual page 91

Once the Battery test has completed, press the
key, 'Do Battery Load Test' will be displayed, press
the key.
Test PGMs?
To test the PGMs press the
Select the PGMs you would like to test (see page 75
for the PGM types) and press the
All outputs programmed as the type selected above
will be active. Press the
switch off. Repeat for other output types as required.
Press the key. 'Test PGM's' will be displayed.
Press the key.
Test PHC Communications?
To test the PHC Communications press the
Press the key if you are not using a PABX or
press the key if you are (i.e. if you need a "9" to
dial an outside line).
Please wait will be displayed
Press the key once it has completed. 'Test PHC
Communications' will be displayed, press the
You will be returned to the Engineer Menu.
If the test has failed please see page 143.
RINS871-3
key.
key.
key. The outputs will
key.
key.
P C X S M S A N D P C X 2 5 6 S Y S T E M M A N U A L
Page: 91