Stu / Ate Pin Outputs (Defaults); Digi Channel Outputs; Pcx-Prox/Ext Pgm Output - Pyronix 256 System Manual

P C X S M S A N D P C X 2 5 6 S Y S T E M M A N U A L

13.15.2 STU / ATE Pin Outputs (Defaults)

Any communicating device with the industry standard footprint may be plugged onto the control panel STU /
ATE (Alarm Transmission Equipment) pins. The default types for the footprint are as follows:
COM LOOM
1 (Blue)
2 (Orange)
3 (Yellow)
4 (Brown)
5 (Purple)
6 (Green)
7 (Black)
8 (Purple)
9 (White)
10 (Light Grey)
NOTE: There is an "output invert" option for use with positive removed signalling. Insufficient
current is available for any other application. Please see 'Site Options', page 84.

13.15.3 Digi Channel Outputs

The on-board digital communicator uses the following default PGM types:
Channel
1
2
3
4
5
6
7
8
9
10

13.15.4 PCX-PROX/EXT PGM Output

The RED LED on the PCX-PROX/EXT can be programmed so that it follows an output.
To achieve this, go to 'CHANGE OUTPUTS' and then 'Reader PGMs' and program the first PGM output
(PGM1) to whichever type is required.
For example you may want the Prox to show the system armed, therefore you can use the output "0204:
Final Arm A". The RED LED will then be illuminated once Partition A has armed.
Page: 78
Default Type (PCX 26/SMS)
Fire (0001)
HU Device Any (0009)
Unconfirmed Any (0018)
Final Arm Any (0022)
Tamper Any (0007)
Confirmed Any (0006)
Omit Rearm Any (0017)
Global Fault 2 (0056)
Global Fault 1 (0055)
Test ATS (0064)
Please see page 119 for the connection.
For programming on the STU / ATE pins please see page 79.
Default Type (PCX 26/SMS)
Fire (PGM 0001)
HU Device Any (PGM 0009)
Unconfirmed Any (PGM 0018)
Final Arm Any (PGM 0022)
Tamper Any (PGM 0017)
Confirmed Any (PGM 0006)
Omit Rearm Any (0017)
AC Fail (0052)
Global Fault 1 (0055)
Test ATS (0064)
For programming on the Digi Channels please see page 98.
Default Type (PCX 256)
Fire (0001)
HU Device Any (0009)
Unconfirmed Any (0018)
Final Arm Any (0022)
Tamper Any (0007)
Confirmed Any (0006)
Omit Rearm Any (0017)
AC Fail (0052)
Global Fault 2 (0056)
Test ATS (0064)
Default Type (PCX 256)
Fire (PGM 0001)
HU Device Any (PGM 0009)
Unconfirmed Any (PGM 0018)
Final Arm Any (PGM 0022)
Tamper Any (PGM 0007)
Confirmed Any (PGM 0006)
Omit Rearm Any (0017)
AC Fail (0052)
Global Fault 2 (0056)
Test ATS (0064)
RINS871-3