Pyronix 256 System Manual page 60

P C X S M S A N D P C X 2 5 6 S Y S T E M M A N U A L
V i s u a l K e y p a d P r o g r a m m i n g P r o c e d u r e
Assign Keypads/Readers
Using the and
KEYPADS/READERS?'
Press the key
Address
Enter the address of the keypad/reader you wish to
assign. Press the key
Type
Enter : for Keypad
Enter : for Reader
Enter : for Not Used
Press the key
NOTE: This function will only be displayed if you
have programmed a Reader.
Reader Is
Enter : for Arm Point
Enter : for S/Part Control*
Enter : for Access Control*
Enter : for Disarm Only
*Not available on PCX 26/SMS
Press the key
Arm Point Arms
Select the Arm Points you would like for 'arming' the
system. Press the
NOTE: The partition options will change
depending on the system you are using.
Please note the primary partitions are A,B,C and D.
'Default Level' will be displayed on the PCX 26/SMS;
you need to select which arm mode you would like to
be automatically selected initially. Arm Point Name
will then be displayed.
Page: 60
A S S I G N K E Y P A D S / R E A D E R S
keys, scroll to 'ASSIGN
key
RINS871-3