Button Actions; Flexi-Set; Adding A New User - Pyronix ENFORCER V11 Extended User Manual

Each wireless keyfob has four buttons that can be programmed for any of the following functions.
No Action
Disables the button.
Show Status
Prompts the LED on the keyfob to indicate whether the system is armed or disarm.
Set Area
Arms the chosen area(s)
Unset Area
Disarms the chosen area(s)
Operate Output
Triggers an output on the panel (programmed by Engineer)
Flexi-set allows you to choose which level/area to arm if a user code or tag is assigned to one or more levels/areas. If
this function is disabled, when a user code is entered or proximity tag presented, the system will automatically arm
the levels/areas that the user is assigned to.
Please note: Any proximity tags used on a standalone tag reader must have flexi-set set to 'No' .
Press b or h to scroll to 'EDIT USERS?' .
Press f.
To add a new code, tag, or keyfob press f. Press h to
delete or change a user code (see further down for details).
Press [ or ] to choose a user number. Press f.
Enter the new code, present a tag or press and hold a keyfob
button until the display changes. Once 'asterisks' appear, the tag
or user code will be now assigned to this user. Press f.
ENFORCER V11 EXTENDED USER GUIDE

Button Actions

Flexi-set

Adding a New User

EDIT USER?
Add New User?
Empty [01]
Enter User Code
[******]
17