Machine Specifications - Fresenius Medical Care Liberty Select User Manual

Machine Specifications

Overall
Dimensions
Weight
Operating Conditions
Temperature
Rel. Humidity
Atmospheric
Pressure Range
Noise Level
Transportation and Storage Conditions
Temperature
Rel. Humidity
Atmospheric
Pressure Range
Electrical
Power Supply
Power
consumption
Circuit Breaker
External
Connections
250
21.5 cm H x 41.28 cm D x 47.63 cm W
14.5 ± 1.8 kg (32 ± 4 lbs.)
15-33°C (59 – 92F)
30-75% (EN 60601-1-2)
70 kPa to 106 kPa
Does not exceed 40 dBA
-31 to 54C (-25 to 130 F)
Non-condensing
50 kPa to 106 kPa
Single phase or two phase center-tapped
AC 100-240 V, 50/60Hz
480 Watts at 100V
700 Watts at 240V
6 Amp. breaker contained in Power Entry Module
USB Port
IEC 60601-1:1988, A1:1991, A2:1995
Clause 6.8.2a, 6.8.2c (Accessories, SIP/SOP connections)
Accessories equipment connected to the analog and digital
interfaces must be certified to the respective IEC standards
(i.e. IEC 60950 for data processing equipment and IEC
60601-1 for medical equipment). Furthermore all
configurations shall comply with the system standard IEC
60601-1-1. Persons who connect additional equipment to
the signal input part or signal output part configure a
medical system, and are therefore responsible that the
system complies with the requirements of the system
standard IEC 60601-1-1. If in doubt, consult the Technical
Support department at 1-800-227-2572 or your local
representative.
P/N 480145 Rev A Liberty Select Cycler User's Guide