Table of Contents
Advertisement
Alarms
Battery RAM Alarm
CRC Alarm
EEPROM Alarm
Heater Alarm
Pneumatic Alarm
Self Test Alarm
System Error
Treatment Alarm
Watchdog Alarm
210
During an alarm, the Status Bar background turns red and
an audible alarm sounds. Press the STOP key to silence
your cycler. Record the error code and call a Technical
Service Representative at 1-800-227-2572. The following
are alarms:
Your cycler cannot access battery RAM.
A critical software error has occurred.
A critical circuit board error has occurred.
The heater temperature is reading too high or too low and
cannot be corrected.
The pneumatic sensor is reading incorrectly or is out of
range and cannot be corrected.
A self test has failed after repeated retests.
A critical error has occurred.
A Treatment Warning was not able to be corrected.
A critical software error has occurred.
P/N 480145 Rev A
Liberty Select Cycler User's Guide
Advertisement
Table of Contents
