Table of Contents
Advertisement
22 Prime Complete
Close patient line (blue clamp) or press back to prime again
If you see air in the lines and need to prime them again,
touch the Back button. Your machine will re-prime the
lines.
If your lines have been primed and there is no air in them,
close the patient line (blue clamp).
23 Touch Next
Make sure your patient line (blue clamp) is clamped.
Touch the Next button to continue to the next screen. The
daytime manual exchange screen will appear. You will
need to enter your daytime manual exchange volume, if
you performed a manual exchange.
A manual exchange is when you connect your catheter
extension set to a bag of solution and perform an exchange
without using your Liberty Select Cycler.
Liberty Select Cycler User's Guide
Note: If you are using tubing set model P/N 050-
87216 with a twenty foot long patient line, you
may need to press the Back button again to ensure
the line is fully primed.
P/N 480145 Rev A
127
Advertisement
Table of Contents
