Table of Contents
Advertisement
Warning: Shock hazard. Do not remove Heater Tray.
Refer servicing to qualified personnel. The electrical
source must be single phase, three-conductor type at
120/250 VAC 50/60Hz. Your cycler needs a protective
earth electrical ground connection. The outlet you use for
your cycler must be checked and maintained for a good
ground connection to protect you from risk of electrical
shock.
Warning: Shock hazard. The machine must be plugged
directly into an electrical outlet; do not use extension
cords or power strips. Do not use power cords other than
those provided with your cycler. Do not use the power
cord if broken or damaged. If you must connect your
cycler to a 240V power source, contact a Fresenius
Medical Care Technical Support Representative at 1-800-
227-2572 for a power cord rated for 240V.
Caution: Do not place your cycler near external heating
or cooling sources like heaters or air conditioners.
Caution: Your Liberty Select Cycler contains an internal
battery. This battery requires no periodic maintenance
and you should not attempt to replace it.
Caution: Your Liberty Select Cycler is a computer
controlled electro-mechanical medical device. It should
be installed in an appropriate environment (indoors) free
from extremes of temperature and humidity and
reasonably protected from dust and dirt contamination or
liquid splashes. Failure to install your Liberty Select
Cycler according to these guidelines may result in
improper operation or early failure of the device or its
parts.
Caution: Use only cycler tubing sets intended for the
Liberty Select Cycler.
Caution: Use only your fingertips on the Touch Screen
and cycler keys. Use of other objects, such as pens, may
result in damage or premature failure.
Caution: The cassette door is pressurized. Do not
attempt to open the cassette door until your machine
instructs you to do so.
20
P/N 480145 Rev A
Liberty Select Cycler User's Guide
Advertisement
Table of Contents
