Table of Contents
Advertisement
24 Select daytime manual exchange information
If you did not perform a manual exchange Fill since you
last turned off your cycler, you may leave this button set to
NO. Continue to step 26 below.
If you did perform a manual exchange Fill since you last
turned off your cycler, you must set the daytime exch.
button to YES.
To set the daytime exch. button to YES, touch the button
and it will turn orange. Use the Up/Down Arrow (/)
keys to change it from NO to YES. Press the OK key to
save the change.
25 Enter manual fill volume if you had a manual exchange
After setting the daytime exch. button to YES, the manual
fill volume button will change from gray to yellow. You
may now edit that button. Touch the manual fill volume
button, it will turn orange. Use the Up/Down Arrow
(/) keys to scroll up or down to the fill volume you
have left in your abdomen from your last manual exchange
Fill.
26 Press OK
Press the OK key to confirm and save your settings.
27 Touch Next
Touch the Next button to continue to the next screen.
Liberty Select Cycler User's Guide
Warning: You must enter whether or not you
performed any manual exchanges since you last
turned off your cycler. If you performed a manual
exchange, you must then also enter the fill volume.
If you do not program this information into your
Liberty Select Cycler at this time, your cycler will
not know that you have additional fluid in your
abdomen. Do NOT bypass Drain 0. Your Liberty
Select Cycler will switch to Fill 1 when you are
finished draining.
P/N 480145 Rev A
129
Advertisement
Table of Contents
