Table of Contents
Advertisement
Setting up your Liberty Select Cycler
Your Liberty Select Cycler is easy to set up. Follow the
instructions below:
1 Remove your Liberty Select Cycler from box
Pull out the blue foam.
Pull dust cover aside.
Pick up your cycler by both handles on either side.
Carefully lift your cycler out of its shipping box. Set it
on a stable, level surface such as a table with the screen
facing you.
Keep all foam and packaging in case your cycler needs
to be repacked.
Position your cycler near the edge of the table or Liberty
cart so the tubing from the cassette will be able to hang
down without kinking.
Make sure that the top of the cycler is no more than 12
inches higher or lower than your bed.
Make sure the cycler is not close to a heating or cooling
source.
2 Connect stay•safe Organizer
Push the stay•safe Organizer onto the mounting tab below
the Control Panel.
Liberty Select Cycler User's Guide
Warning: Use proper lifting techniques: lift with
your knees and not your back.
Caution: Do not lift your machine by the heater
tray.
Caution: Make certain the vent on the back of your
machine is free of obstructions.
P/N 480145 Rev A
47
Advertisement
Table of Contents
