Table of Contents
Advertisement
1 Select values
Touch the yellow button to select the value it displays:
Add diurnal UF—Whether or not to include Drain 0 in
the total ultrafiltration (UF) during the day. If you
answer YES, the UF from Drain 0 is included in the UF
total. This option defaults to NO.
Language—English, Spanish, or French.
Last bag option—If this option is selected, your cycler
will fill you exclusively from the Last Bag line (green
clamp) for your Last Fill. During the last dwell your
cycler will empty the heater bag, fill it from the last bag,
warm the fluid and deliver this specific solution for your
last fill. This option defaults to NO.
If you need more than 24,000 mL total fill volume and
do not require a Last Bag Option, this Last Bag line
(green clamp) may be used for additional solution.
SI Units—If set to NO, your weight is displayed in lbs.,
your temperature is in °F, and your blood glucose is in
mg/dL.
If set to YES, your weight is in kgs, your temperature is
in °C, and your blood glucose is in mmol/dL.
Personal data—If this option is set to YES
(recommended), your cycler will ask you to enter your
personal health data on the Personal Data screen after
each treatment is complete.
USB enabled— The IQdrive is a device used to transfer
your prescription and treatment data. The 'USB
enabled' option must be set to YES to access data. This
option defaults to NO.
2 Enter values
When you touch a yellow button, it will turn orange.
Use the Up/Down Arrow
prescribed value. Repeat these steps to enter all of your
prescribed values.
Liberty Select Cycler User's Guide
Note: The description of the options on this
screen is continued on the next five pages.
keys to set it to your
(/)
P/N 480145 Rev A
87
Advertisement
Table of Contents
