Table of Contents
Advertisement
Alarm
During an alarm, the Status Bar turns red. Alarms are not
resettable. When you receive an error code:
Record the error code (located on the right side
just below the Status Bar)
Mask, then wash or sanitize hands as instructed
by your PD nurse.
Insert the stay•safe PIN connector connected to
your catheter extension set into the stay•safe
organizer clip below the control panel
Insert a new stay•safe cap on the left side of the
organizer
Turn the blue button on the PIN connector ¼ turn
clockwise and push it in to make sure that the
PIN has been inserted into the PIN connector
Close patient line (blue clamp)
Close catheter extension set clamp
Use aseptic technique to carefully disconnect
your catheter extension set from your patient line
and cap off with a new sterile stay•safe cap
Check that the new sterile stay•safe cap is
securely attached to your catheter extension set
before removing it from the stay•safe organizer
Call a Fresenius Medical Care Technical Support
Representative at 1-800-227-2572
You will also be asked for your Liberty Select Cycler serial
number and software version, which is found on the top of
your cycler above the cassette door.
Liberty Select Cycler User's Guide
Warning: If your machine alarms, do not attempt
to use it for treatment.
P/N 480145 Rev A
217
Advertisement
Table of Contents
