Siemens SINUMERIK Series Function Manual page 200

3 Setting up functions
3.6 Copy
Function
Source machine
Current target
machine
User
Progress
Already copied
To be
copied
Fault
Copied
function settings
3-200
Description
The source machine for the copying process is
indicated during the entire operation.
If only one target machine is selected, it is dis-
played here corresponding to the target ma-
chine.
If multiple target machines are selected, they are
displayed as a list in a separate field.
The user who was logged on to ePS at the time
the copying process was started is displayed
here.
The copying process can take several hours to
complete if a large number of machines has
been selected as the target. The progress bar
shows an estimation of the completed copying
process as a percentage value.
Data is copied to the machines in sequential
order. All configurations included in the selection
are always copied in their entirety one after the
other to each machine. This makes it possible to
indicate how many machines already have all
complete copies.
The number of copies remaining is displayed as
the difference to the 'already copied' machines.
If one or more errors occur during copying, the
error display is incremented by one for each
machine.
Information about the errors is displayed sepa-
rately.
Errors are usually caused by an unsuitable se-
lection of the source and target machines (num-
ber of axes, SIMATIC/SINUMERIK, etc.).
Irrespective of any errors that occur, everything
that is technically and logically appropriate and
correct is copied correctly.
All configurations selected for copying are listed,
just as in the selection, in a window with a scroll
bar.
ePS Network Services, Function Manual (FH) - 03/2012
Type
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
© Siemens AG 2012 All Rights Reserved
03/2012