Siemens SINUMERIK Series Function Manual page 165

03/2012
Function
Log level
Default confi-
guration
Max. number
of signaled
cases
Time interval
in
minutes
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
Scripts can be monitored on
- Normal error
- Information
- Warning
- Critical error
The default setting is 100 cases notified/signaled
in one hour. If you select this, you cannot define
the next two parameters yourself.
If the default configuration is not selected, then
the number of notified/signaled cases to be
checked can be entered here, which may occur
as a maximum in the time interval specified
below without initiating this trigger.
If the default configuration is not selected, then
the number of error cases specified above in the
specified time interval is checked in order to
initiate this trigger.
3 Setting up functions
3.4 Fault services
Type
DISPLAY
SELECTION
DISPLAY
SELECTION
DISPLAY
INPUT
DISPLAY
INPUT
3-165