Siemens SINUMERIK Series Function Manual page 249

03/2012
Function
Characteristics
Parameters
General conditi-
ons
Time series
Machine series
Time period
Markings
Defining time
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
The table shows the characteristics that are calculated for the
examined type of measurement series. For displaying in the
diagram, a characteristic needs to be selected.
The pull-down "Parameter" table shows the parameters of the
measurement being performed. Parameters that are not iden-
tical in all measurement series will be marked. Click the
"Open" icon in the table to display a detailed view of the pa-
rameters for each individual measurement series.
The pull-down "Supplementary conditions" table shows the
supplementary conditions of the measurement being per-
formed. Supplementary conditions that are not identical in all
measurement series will be marked. Click the "Open" icon in
the table to display a detailed view of the supplementary con-
ditions for each individual measurement series.
This function displays the progression over time of the se-
lected characteristic within the defined period.
This function displays the selected characteristic from the
compared measurement series at a defined point in time. It is
displayed as a bar chart. The ordinate at the left-hand side
indicates the relative deviation from the average value of the
examined characteristics values. The right-hand ordinate indi-
cates the absolute value.
The time frame to be examined as a time series in the display
can be adjusted. You can select certain defined periods or a
period limited by two markings in the displayed diagram.
In the display as time series, two markings can be set by dou-
ble-clicking. These markings indicate the individual character-
istic values at this point in time and serve to define a time
frame or a point in time.
In the display as machine series, the reference point can be
defined. You can enter the point in time explicitly or use one of
the two markings.
With this function, all values of the data points are exported to
an Excel file.
The data points of each data series are stored in separate
tables.
5 Statistics/Export
5.1 Multi-machine views
5-249