Siemens SINUMERIK Series Function Manual page 115

03/2012
Function
Number of lines
Name
Memory requi-
rements
Performance
Note
The PLC performance index allows you to define how much performance may be
used for the ePS PLC trigger. Each ePS PLC trigger uses a certain number of
performance points. In this way you can control to what extent the PLC may be
occupied by the ePS PLC trigger.
The PLC performance index can be defined on an individual basis, since the
amount of memory and the cycle time guaranteed for ePS Network Services may
vary depending on the performance of the control and the processes executed on
it.
Fig. 3-23: Exchanging addresses in notifications
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
The number in the display indicates the num-
ber of lines per window that can be shown in
this menu. You can select up to 200 lines. A
scroll bar will then be displayed in the window.
Names of the control monitors.
Used memory requirement of monitor for:
 PLC trigger configurations
 PLC trace configurations
 PLC data
Currently used PLC performance.
Display indicating whether the control monitor
has triggers that are independent of the com-
mon start date:
No display: No
Faded display: Yes, at least one
Normal display: Yes, all
Monitor runs on the machine or is inactive.
An exclamation point indicates that the con-
figuration currently stored is not yet effective
on the machine.
3 Setting up functions
3.4 Fault services
Type
DISPLAY
SELECTION
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
3-115