Siemens SINUMERIK Series Function Manual page 195

03/2012
Copying limit values
Fig. 3-77:
Copying from the source machine to the target machine:
Function
OK
Back
Function
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
The arrow displays the preselected user configurations on the
target machine.
The "X" is used to discard the selected user configurations on the
target machine preselected for copying to the target machine.
This icon represents the copying to the target machine.
This icon represents an overwrite of the user configuration on the
target machine.
"OK" confirms that the copying process is to be performed.
"Back" cancels the process without performing any copy.
Description
Selection, if only the limit values for the time se-
ries are to be copied. The configurations remain
unchanged, all limit values of the configurations
selected for copying are copied.
Copying limit values can also be used for 1:n
copying.
3 Setting up functions
3.6 Copy
Type
SELECTION
(Toggle)
3-195