Siemens SINUMERIK Series Function Manual page 97

03/2012
Add variables by selecting them from predefined variables:
Function
Axis
Select all
Add
Select NC
variables
Select ePS
variables
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
The variables that can be selected refer to one
axis each. This axis is defined with this selection
field.
All variables that are available are selected.
The selected variables are added to the configura-
tion of the variable monitor.
Switchover in the variable tree between prede-
fined variables.
The variables are described in detail in the
SINUMERIK documentation.
Switchover in the variable tree between prede-
fined variables.
Constant:
The constant is always 1 and is used to check the
variable monitors.
Start time:
The start time is the time stamp as of which vari-
ables can be recorded (client runs on the frontend
PC).
Current time:
The current time is the time stamp of the frontend
PC at the time of recording via the variable moni-
tor.
3 Setting up functions
3.1 Maintenance
Type
DISPLAY
SELECTION
SELECTION
ACTION
Function
3-97