Siemens SINUMERIK Series Function Manual page 181

03/2012
The configuration of variable monitors is described in Section: Configuring variable
monitors.
The triggers described previously for values that have been recorded using vari-
able monitors are based on the action of initiating variable monitors.
The variable monitors are programmed separately from the control monitor, as in-
dividual modular configurations. For the control monitor actions, all available vari-
able monitors are provided for the purpose of initiation via individual triggers. Any
trigger that can be selected individually can be used for this purpose.
Note
There is the option of using a direct link between the variable monitor and this
control monitor configuration in order to enable rational configuration.
Fig. 3-64: Control monitor with variable monitor
Availability and privileges
Variable monitors can only be configured at the PC. The authorization required for
configuring variable monitors is described in detail in the Appendix.
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
3 Setting up functions
3.4 Fault services
3-181