Siemens SINUMERIK Series Function Manual page 278

6 Management
6.1 Organization administration
Function
Selected machine
Exporting
Upgrade
Delete
Select entire
page
Select all
Exporting machines
A machine must be switched into an inactive state to export a machine, configura-
tions and data. This is a function setting that can be selected and deselected from
the PC for every machine. Export is only for your "own machines" (no external ma-
chines that have been released).
Destination data must be specified for the export. These include the name of the
server to which the export should be imported (generally an eP satellite) and the
organization on the server.
6-278
Description
If you want to run an individual ePS machine
with another server, export the machine and
import it again on the other server.
The machine must first be disconnected
before it is exported.
Activate the machine for the purpose of using
the ePS Network Services. Deactivated
machines cannot use ePS Network Services.
Deletes a machine permanently. Data is no
longer available for this machine.
If an individual machine is selected, it is
displayed again separately, as described
above.
Launches the export function when multiple
machines are selected.
Launches the conversion of ePS Version 3 to
Version 4 when multiple machines are
selected.
Launches the machine deletion procedure
when multiple machines are selected.
Enables easy selection of all machines on
the current page (up to 200).
Enables easy selection of all machines, even
those not visible on the current page.
ePS Network Services, Function Manual (FH) - 03/2012
Type
ACTION
ACTION
(Toggle)
ACTION
ACTION
ACTION
ACTION
ACTION
SELECTION
SELECTION
© Siemens AG 2012 All Rights Reserved
03/2012